A. Akcil, C. Erust, C. S. Gahan, M. Ozgun, M. Sahin et al., Precious metal recovery from waste printed circuit boards using cyanide and non-cyanide lixiviants-a review, Waste Management, vol.45, pp.258-271, 2015.

I. Anastopoulos, A. Bhatnagar, and E. C. Lima, Adsorption of rare earth metals: A review of recent literature, Journal of Molecular Liquids, vol.221, pp.954-962, 2016.

F. Arslan and B. Sayiner, Extraction of gold and silver from Turkish gold ore by ammoniacal thiosulfate leaching, Mineral Processing and Extractive Metallurgy Review, vol.29, issue.1, pp.68-82, 2008.

A. Askari, A. Ghadimzadeh, C. Gomes, and M. B. Ishak, E-waste management: towards an appropriate policy, European Journal of Business and Management, vol.6, issue.1, pp.37-46, 2014.

C. P. Balde, F. Wang, R. Kuehr, and J. Huisman, The global e-waste monitor 2014: Quantities, flows and resources, United Nations University, pp.1-79, 2015.

K. Becker, A. Chmielarz, Z. Szo?omicki, L. Gotfryd, J. Piwowo-nska et al., Hydrometalurgiczny recykling akumulator ow Ni-MH i Li-ion. Rudy i Metale Nie_ zelazne Recykling, pp.235-243, 2016.

A. Behnamfard, M. M. Salarirad, and F. Veglio, Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation, Waste Management, vol.33, issue.11, pp.2354-2363, 2013.

D. A. Bertuol, E. H. Tanabe, L. Meili, and H. M. Veit, Hydrometallurgical processing, Electronic waste, pp.61-71, 2015.

M. Bigum, L. Brogaard, and T. H. Christensen, Metal recovery from high-grade WEEE: a life cycle assessment, Journal of Hazardous Materials, vol.207, pp.8-14, 2012.

K. Binnemans, P. T. Jones, B. Blanpain, T. Vangerven, Y. Yang et al., Recycling of rare earths: a critical review, Journal of Cleaner Production, vol.51, pp.1-22, 2013.

I. Birloaga, I. De-michelis, F. Ferella, M. Buzatu, and F. Veglio, Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery, Waste Management, vol.33, issue.4, pp.935-941, 2013.

I. Birloaga, V. Coman, B. Kopacek, and F. Veglio, An advanced study on the hydrometallurgical processing of waste computer printed circuit boards to extract their valuable content of metals, Waste Management, vol.34, issue.12, pp.2581-2586, 2014.

I. Birloaga and F. Veglio, Study of multi-step hydrometallurgical methods to extract the valuable content of gold, silver and copper from waste printed circuit boards, Journal of Environmental Chemical Engineering, vol.4, issue.1, pp.20-29, 2016.

M. Buchert, A. Manhart, D. Bleher, and D. Pingel, Recycling critical raw materials from waste electronic equipment. Freiburg: ? Oko-Institut eV, vol.49, pp.30-40, 2012.

M. Buchert, D. Sch?-uler, D. ;. Bleher, and . Unep-dtie;-?-oko-institut, Critical metals for future sustainable technologies and their recycling potential, 2009.

S. Camelino, J. Rao, R. L. Padilla, and R. Lucci, Initial studies about gold leaching from printed circuit boards (PCB's) of waste cell phones, Procedia Materials Science, vol.9, pp.105-112, 2015.

A. Chagnes and B. Pospiech, A brief review on hydrometallurgical technologies for recycling spent lithium-ion batteries, Journal of Chemical Technology and Biotechnology, vol.88, issue.7, pp.1191-1199, 2013.

P. Chancerel, C. E. Meskers, C. Hagel?-uken, and V. S. Rotter, Assessment of precious metal flows during preprocessing of waste electrical and electronic equipment, Journal of Industrial Ecology, vol.13, issue.5, pp.791-810, 2009.

Y. Chehade, A. Siddique, H. Alayan, N. Sadasivam, S. Nusri et al., Recovery of gold, silver, palladium, and copper from waste printed circuit boards, Proceedings of the International Conference on Chemical, Civil and Environment Engineering (ICCEE), pp.24-25, 2012.

W. T. Chen, L. C. Tsai, F. C. Tsai, and C. M. Shu, Recovery of gallium and arsenic from gallium arsenide waste in the electronics industry, CLEAN-Soil, Air, Water, vol.40, issue.5, pp.531-537, 2012.

M. Contestabile, S. Panero, and B. Scrosati, A laboratory-scale lithium-ion battery recycling process, Journal of Power Sources, vol.92, issue.1, pp.523-524, 2001.

. Cree-inc, Fluorescent Lamps Construction, 2015.

J. Cui and E. Forssberg, Mechanical recycling of waste electric and electronic equipment: a review, Journal of Hazardous Materials, vol.99, issue.3, p.61, 2003.

J. R. Cui and L. F. Zhang, Metallurgical recovery of metals from electronic waste: A review, Journal of Hazardous Materials, vol.158, issue.2-3, pp.228-256, 2008.

J. M. Cunha, L. Klein, M. M. Bassaco, E. H. Tanabe, D. A. Bertuol et al., Cobalt recovery from leached solutions of lithiumeion batteries using waste materials as adsorbents, The Canadian Journal of Chemical Engineering, vol.93, pp.2198-2204, 2015.

N. Das and D. Das, Recovery of rare earth metals through biosorption: an overview, Journal of Rare Earths, vol.31, issue.10, pp.933-943, 2013.

I. Dalrymple, N. Wright, R. Kellner, N. Bains, K. Geraghty et al., An integrated approach to electronic waste (WEEE) recycling, Circuit World, vol.33, issue.2, pp.52-58, 2007.

I. De-michelis, F. Ferella, E. F. Varelli, and F. Vegli-o, Treatment of exhaust fluorescent lamps to recover yttrium: Experimental and process analyses, Waste Management, issue.12, pp.2559-2568, 2011.

I. De-michelis and B. Kopacek, Hydro WEEE project: Design and construction of a mobile demonstration plant, Waste Electrical and Electronic Equipment Recycling, pp.357-383, 2018.

C. R. De-oliveira, A. M. Bernardes, and A. E. Gerbase, Collection and recycling of electronic scrap: A worldwide overview and comparison with the Brazilian situation, Waste Management, vol.32, issue.8, pp.1592-1610, 2012.

E. C. Directive, Directive 2012/19/EU of the European Parliament, WEEE. Official Journal of the European Union L, vol.197, pp.38-71, 2012.

G. Dodbiba, H. Nagai, L. P. Wang, K. Okaya, and T. Fujita, Leaching of indium from obsolete liquid crystal displays: Comparing grinding with electrical disintegration in context of LCA, Waste Management, vol.32, issue.10, pp.1937-1944, 2012.

C. Duan, X. Wen, C. Shi, Y. Zhao, B. Wen et al., Recovery of metals from waste printed circuit boards by a mechanical method using a water medium, Journal of Hazardous Materials, vol.166, issue.1, pp.478-482, 2009.

J. R. Duflou, G. Seliger, S. Kara, Y. Umeda, A. Ometto et al., Efficiency and feasibility of product disassembly: A case-based study, CIRP Annals, vol.57, issue.2, pp.583-600, 2008.

D. Dupont and K. Binnemans, Rare-earth recycling using a functionalized ionic liquid for the selective dissolution and revalorization of Y 2 O 3 : Eu 3þ from lamp phosphor waste, Green Chemistry, vol.17, issue.2, pp.856-868, 2015.

D. Dupont and K. Binnemans, Recycling of rare earths from NdFeB magnets using a combined leaching/extraction system based on the acidity and thermomorphism of the ionic liquid, Hbet, 2015.

, Green Chemistry, vol.17, issue.4, pp.2150-2163

B. Ebin and M. I. Isik, Pyrometallurgical processes for the recovery of metals from WEEE, WEEE Recycling, pp.107-137, 2017.

K. Elo and E. Sundin, Process concepts for semi-automatic dismantling of LCD televisions, Procedia CIRP, vol.23, pp.270-275, 2014.

C. Er?-ust, A. Akcil, C. S. Gahan, A. Tuncuk, and H. Deveci, Biohydrometallurgy of secondary metal resources: a potential alternative approach for metal recovery, Journal of Chemical Technology and Biotechnology, vol.88, issue.12, pp.2115-2132, 2013.

C. Eswaraiah, T. Kavitha, S. Vidyasagar, and S. S. Narayanan, Classification of metals and plastics from Printed Circuit Boards (PCB) using air classifier, Chemical Engineering and Processing, vol.47, pp.565-576, 2008.

, Commission staff working paper accompanying the proposal for a directive of the European Parliament and of the Council on waste electrical and electronic equipment (WEEE) (recast) -Impact Assessment, European Commission, 2008.

, Report on critical raw materials for the EU, Report of the Adhoc Working Group on defining critical raw materials, 2014.

, Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions-A European Agenda for the collaborative economy, 2017.

, Waste statistics -electrical and electronic equipment, European Union statistics, 2017.

J. Ficeriova, P. Balaz, and E. Gock, Leaching of gold, silver and accompanying metals from circuit boards (PCBs) waste, Acta Montanistica Slovaca, vol.16, issue.2, pp.128-131, 2011.

K. Fujiwara, A. Ramesh, T. Maki, H. Hasegawa, and K. Ueda, Adsorption of platinum (IV), palladium (II) and gold (III) from aqueous solutions on l-lysine modified cross linked chitosan resin, Journal of Hazardous Materials, vol.46, pp.39-50, 2007.

P. Galbraith and J. L. Devereux, Beneficiation of printed wiring boards with gravity concentration, IEEE International Symposium on Electronics & the Environment, pp.6-9, 2002.

. May, , pp.242-248

P. M. Gallegos-acevedo, J. Espinoza-cuadra, and J. M. Olivera-ponce, Conventional flotation techniques to separate metallic and nonmetallic fractions from waste printed circuit boards with particles nonconventional size, Journal of Mining Science, vol.50, issue.5, pp.974-981, 2014.

M. Gergoric, C. Ekberg, B. M. Steenari, and T. Retegan, Separation of heavy rareearth elements from light rare-earth elements via solvent extraction from a neodymium magnet leachate and the effects of diluents, Journal of Sustainable Metallurgy, vol.3, issue.3, pp.601-610, 2017.

B. Ghosh, M. K. Ghosh, P. Parhi, P. S. Mukherjee, and B. K. Mishra, Waste printed circuit boards recycling: An extensive assessment of current status, Journal of Cleaner Production, vol.94, pp.5-19, 2015.

M. G?-okelma, A. Birich, S. Stopic, and B. Friedrich, A review on alternative gold recovery re-agents to cyanide, Journal of Materials Science and Chemical Engineering, vol.4, issue.8, pp.8-17, 2016.

R. Golmohammadzadeh, F. Rashchi, and E. Vahidi, Recovery of lithium and cobalt from spent lithium-ion batteries using organic acids: Process optimization and kinetic aspects, Waste Management, vol.64, pp.244-254, 2017.

M. Goosey and R. Kellner, A Scoping Study: End-of-Life Printed Circuit Boards, Intellect and the Department of Trade and Industry, vol.44, 2002.

A. C. Grosse, G. W. Dicinoski, M. J. Shaw, and P. R. Haddad, Leaching and recovery of gold using ammoniacal thiosulfate leach liquors (a review), Hydrometallurgy, vol.69, issue.1, pp.1-21, 2003.

M. Gurung, B. B. Adhikari, H. Kawakita, K. Ohto, K. Inoue et al., Recovery of gold and silver from spent mobile phones by means of acidothiourea leaching followed by adsorption using biosorbent prepared from persimmon tannin, Hydrometallurgy, vol.133, pp.84-93, 2013.

C. Hageluken, Improving metal returns and eco-efficiency in electronics recycling-a holistic approach for interface optimisation between pre-processing and integrated metals smelting and refining, IEEE International Symposium on Electronics & the Environment, pp.218-233, 2006.

Y. C. He and Z. M. Xu, Recycling gold and copper from waste printed circuit boards using chlorination process, vol.5, pp.8957-8964, 2015.

L. P. He, S. Y. Sun, Y. Y. Mu, X. F. Song, and J. G. Yu, Recovery of lithium, nickel, cobalt, and manganese from spent lithium-ion batteries using L-tartaric acid as a leachant, ACS Sustainable Chemistry & Engineering, vol.5, issue.1, pp.714-721, 2016.

T. Hennebel, N. Boon, S. Maes, and M. Lenz, Biotechnologies for crucial raw material recovery from primary and secondary sources: RD priorities and future perspectives, New Biotechnology, vol.32, issue.1, pp.121-127, 2015.

S. H. Hu, M. Y. Xie, Y. M. Hsieh, Y. S. Liou, and W. S. Chen, Resource recycling of gallium arsenide scrap using leaching-selective precipitation, Environmental Progress & Sustainable Energy, vol.34, issue.2, pp.471-475, 2015.

J. Huisman, C. B. Boks, and A. L. Stevels, Quotes for environmentally weighted recyclability (QWERTY): concept of describing product recyclability in terms of environmental value, International Journal of Production Research, vol.41, issue.16, pp.3649-3665, 2003.

S. Ilyas and J. C. Lee, Biometallurgical recovery of metals from waste electrical and electronic equipment: a review, Chem Bio Eng Reviews, vol.1, issue.4, pp.148-169, 2014.

A. Imre-lucaci, M. Nagy, F. Imre-lucaci, and S. Fogarasi, Technical and environmental assessment of gold recovery from secondary streams obtained in the processing of waste printed circuit boards, Chemical Engineering Journal, vol.309, pp.655-662, 2017.

V. Innocenzi and F. Vegli-o, Recovery of rare earths and base metals from spent nickel-metal hydride batteries by sequential sulfuric acid leaching and selective precipitations, Journal of Power Sources, vol.211, pp.184-191, 2012.

V. Innocenzi, I. De-michelis, and F. Vegli-o, Design and construction of an industrial mobile plant for WEEE treatment: Investigation on the treatment of fluorescent powders and economic evaluation compared to other e-wastes, Journal of the Taiwan Institute of Chemical Engineers, vol.80, pp.769-778, 2017.

A. I??ldar, J. Van-de-vossenberg, E. R. Rene, E. D. Van-hullebusch, and P. N. Lens, Biorecovery of metals from electronic waste, Sustainable Heavy Metal Remediation, pp.241-278, 2017.

A. Is?ldar, E. R. Rene, E. D. Van-hullebusch, and P. N. Lens, Two-step leaching of valuable metals from discarded printed circuit boards, and process optimization using response surface methodology, Advances in Recycling and Waste Management, vol.2, pp.1-9, 2017.

M. K. Jha, A. Kumari, R. Panda, J. R. Kumar, K. Yoo et al., Review on hydrometallurgical recovery of rare earth metals, Hydrometallurgy, vol.165, pp.2-26, 2016.

L. Jing-ying, X. Xiu-li, and L. Wen-quan, Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones, Waste Management, vol.32, issue.6, pp.1209-1212, 2012.

N. N. Joda and F. Rashchi, Recovery of ultra-fine grained silver and copper from PC board scraps. Separation and Purification Technology, vol.92, pp.36-42, 2012.

D. B. Johnson and C. A. Du-plessis, Biomining in reverse gear: Using bacteria to extract metals from oxidised ores, Minerals Engineering, vol.75, pp.2-5, 2015.

M. Kaya, Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes, Waste Management, vol.57, pp.64-90, 2016.

E. Y. Kim, M. S. Kim, J. C. Lee, and B. D. Pandey, Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process, Journal of Hazardous Materials, vol.198, pp.206-215, 2011.

S. S. Konyratbekova, A. Baikonurova, and A. Akcil, Non-cyanide leaching processes in gold hydrometallurgy and iodine-iodide applications: A review, Mineral Processing and Extractive Metallurgy Review, vol.36, issue.3, pp.198-212, 2015.

B. Kopacek, Intelligent disassembly of components from printed circuit boards to enable re-use and more efficient recovery of critical metals, IFAC-PapersOnLine, vol.49, pp.190-195, 2016.

P. Kri-stofov-a, E. Rudnik, and A. Mi-skufov-a, Hydrometallurgical methods of indium recovery from obsolete LCD and LED panels, Metallurgy and Foundry Engineering, vol.42, issue.3, p.157, 2017.

M. A. Kucuker, J. B. Nadal, and K. Kuchta, Comparison between batch and continuous reactor systems for biosorption of neodymium (Nd) using microalgae, Animal and Environmental Sciences, vol.6, pp.197-203, 2016.

M. A. Kucuker, Biomining Concept for Recovery of Rare Earth Elements (REEs) from Secondary Sources. Hamburger Berichte; Bd. 48; Verlag Abfall aktuell der Ingenieurgruppe RUK GmbH, pp.978-981, 2018.

K. Larsson, C. Ekberg, and A. Ødegaard-jensen, Dissolution and characterization of HEV NiMH batteries, Waste Management, vol.33, issue.3, pp.689-698, 2013.

K. Larsson and K. Binnemans, Selective extraction of metals using ionic liquids for nickel metal hydride battery recycling, Green Chemistry, vol.16, issue.10, pp.4595-4603, 2014.

H. L. Le, E. Yamasue, H. Okumura, and K. N. Ishihara, MEMRECS-a sustainable view for metal recycling from waste printed circuit boards, Journal of Environmental Protection, vol.4, issue.8, pp.803-810, 2013.

H. S. Lee and C. W. Nam, A study on the extraction of gallium from gallium arsenide scrap, Hydrometallurgy, vol.49, issue.1, pp.125-133, 1998.

J. Lee, Q. Zhang, and F. Saito, Room temperature extraction of Co and Li from ground lithium-ion secondary battery scrap, vol.116, pp.919-922, 2000.

C. K. Lee and K. I. Rhee, Reductive leaching of cathodic active materials from lithium ion battery wastes, Hydrometallurgy, vol.68, issue.1, pp.167-173, 2003.

C. H. Lee, C. T. Chang, K. S. Fan, and T. C. Chang, An overview of recycling and treatment of scrap computers, Journal of Hazardous Materials, vol.114, issue.1, pp.93-100, 2004.

C. H. Lee, L. W. Tang, and S. R. Popuri, A study on the recycling of scrap integrated circuits by leaching, Waste Management & Research, vol.29, issue.7, pp.677-685, 2011.

C. H. Lee, M. K. Jeong, M. F. Kilicaslan, J. H. Lee, H. S. Hong et al., Recovery of indium from used LCD panel by a time efficient and environmentally sound method assisted HEBM, Waste Management, vol.33, issue.3, pp.730-734, 2013.

C. H. Lee, Y. J. Chen, C. H. Liao, S. R. Popuri, S. L. Tsai et al., Selective leaching process for neodymium recovery from scrap Nd-Fe-B magnet, Metallurgical and Materials Transactions A, vol.44, issue.13, pp.5825-5833, 2013.

J. C. Lee and R. R. Srivastava, Leaching of gold from the spent/end-of-life mobile phone-PCBs using "greener reagents, The Recovery of Gold from Secondary Sources, pp.7-56, 2016.

J. B. Legarth, L. Alting, B. Danzer, D. Tartler, K. Brodersen et al., A new strategy in the recycling of printed circuit boards, Circuit World, vol.21, issue.3, pp.10-15, 1995.

A. Lewis and R. Van-hille, An exploration into the sulphide precipitation method and its effect on metal sulphide removal, Hydrometallurgy, vol.81, issue.3, pp.197-204, 2006.

A. E. Lewis, Review of metal sulphide precipitation, Hydrometallurgy, vol.104, issue.2, pp.222-234, 2010.

J. Li, H. Lu, J. Guo, Z. Xu, and Y. Zhou, Recycle technology for recovering resources and products from waste printed circuit boards, Environmental Science & Technology, vol.41, issue.6, 1995.

J. Li, Z. Xu, and Y. Zhou, Application of corona discharge and electrostatic force to separate metals and nonmetals from crushed particles of waste printed circuit boards, Journal of Electrostatics, vol.65, issue.4, pp.233-238, 2007.

L. Li, J. Ge, R. Chen, F. Wu, S. Chen et al., Environmental friendly leaching reagent for cobalt and lithium recovery from spent lithium-ion batteries, Waste Management, vol.30, issue.12, pp.2615-2621, 2010.

Y. Li, Z. Liu, Q. Li, Z. Liu, and L. &zeng, Recovery of indium from used indium-tin oxide (ITO) targets, Hydrometallurgy, vol.105, issue.3, pp.207-212, 2011.

L. Li, W. Qu, X. Zhang, J. Lu, R. Chen et al., Succinic acid-based leaching system: a sustainable process for recovery of valuable metals from spent Li-ion batteries, Journal of Power Sources, vol.282, pp.544-551, 2015.

J. Li, G. Wang, and Z. Xu, Environmentally-friendly oxygen-free roasting/wet magnetic separation technology for in situ recycling cobalt, lithium carbonate and graphite from spent LiCoO 2 /graphite lithium batteries, Journal of Hazardous Materials, vol.302, pp.97-104, 2016.

T. E. Lister, P. M. Wang, and A. Anderko, Recovery of critical and value metals from mobile electronics enabled by electrochemical processing, Hydrometallurgy, vol.149, pp.228-237, 2014.

Y. Lu, Q. Song, and Z. Xu, Integrated technology for recovering Au from waste memory module by chlorination process: Selective leaching, extraction, and distillation, Journal of Cleaner Production, vol.161, pp.30-39, 2017.

H. Madeno-glu, Recovery of some metals from electronic scrap (Doctoral dissertation, 2005.

A. Marra, A. Cesaro, and V. Belgiorno, Separation efficiency of valuable and critical metals in WEEE mechanical treatments, Journal of Cleaner Production, vol.186, pp.490-498, 2018.

R. Martino, C. Iseli, S. Gaydardzhiev, M. Streicher-porte, and A. Weh, Electro dynamic fragmentation of printed wiring boards as a preparation tool for their recycling, Minerals Engineering, vol.107, pp.20-26, 2017.

&. Mckinsey and . Company, Lighting the Way: Perspectives on the Global Lighting Market, Automotive%20and%20Assembly/Lighting the way Perspectives on global lighting market 2012.ashx, 2012.

F. W. Mcquiston and T. G. Chapman, Recovery of gold or silver, US Patent, 1951.

A. Mecucci and K. Scott, Leaching and electrochemical recovery of copper, lead and tin from scrap printed circuit boards, Journal of Chemical Technology and Biotechnology, vol.77, issue.4, pp.449-457, 2002.

C. Meskers and C. Hagel?-uken, The impact of different pre-processing routes on the metal recovery from PCs, 2009.

P. Meshram, H. Somani, B. D. Pandey, T. R. Mankhand, and H. Deveci, Two stage leaching process for selective metal extraction from spent nickel metal hydride batteries, Journal of Cleaner Production, vol.157, pp.322-332, 2017.

M. Mohammadi, K. Forsberg, L. Kloo, J. M. De-la-cruz, and Å. Rasmuson, Dy (III) and Y (III) by solvent extraction using D2EHPA and EHEHPA, Separation of Nd (III), vol.156, pp.215-224, 2015.

R. Montero, A. Guevara, and E. Dela-torre, Recovery of gold, silver, copper and niobium from printed circuit boards using leaching column technique, Journal of Earth Science and Engineering, vol.2, issue.10, pp.590-595, 2012.

H. Murakami, S. Nishihama, and K. Yoshizuka, Separation and recovery of gold from waste LED using ion exchange method, Hydrometallurgy, vol.157, pp.194-198, 2015.

K. Nakashima, F. Kubota, T. Maruyama, and M. Goto, Feasibility of ionic liquids as alternative separation media for industrial solvent extraction processes, Industrial & Engineering Chemistry Research, vol.44, issue.12, pp.4368-4372, 2005.

J. Nan, D. Han, and X. Zuo, Recovery of metal values from spent lithium-ion batteries with chemical deposition and solvent extraction, Journal of Power Sources, vol.152, pp.278-284, 2005.

J. Nan, D. Han, M. Yang, M. Cui, and X. Hou, Recovery of metal values from a mixture of spent lithium-ion batteries and nickel-metal hydride batteries, 2006.

, Hydrometallurgy, vol.84, issue.1, pp.75-80

G. Natarajan, S. B. Tay, W. S. Yew, and Y. P. Ting, Engineered strains enhance gold biorecovery from electronic scrap, Minerals Engineering, vol.75, pp.32-37, 2015.

G. P. Nayaka, K. V. Pai, G. Santhosh, and J. Manjanna, Recovery of cobalt as cobalt oxalate from spent lithium ion batteries by using glycine as leaching agent, Journal of Environmental Chemical Engineering, vol.4, issue.2, pp.2378-2383, 2016.

A. A. Nayl, R. A. Elkhashab, S. M. Badawy, and M. A. El-khateeb, Acid leaching of mixed spent Li-ion batteries, Arabian Journal of Chemistry, vol.10, pp.3632-3639, 2014.

. Nec-lighting and . Ltd, Fluorescent Lamps and Principles of Light Emission. Company Website, 2015.

I. F. Neto, C. A. Sousa, M. S. Brito, A. M. Futuro, and H. M. Soares, A simple and nearly-closed cycle process for recycling copper with high purity from end life printed circuit boards, Separation and Purification Technology, vol.164, pp.19-27, 2016.

I. O. Ogunniyi, M. K. Vermaak, and D. R. Groot, Chemical composition and liberation characterization of printed circuit board comminution fines for beneficiation investigations, Waste Management, vol.29, issue.7, pp.2140-2146, 2009.

I. O. Ogunniyi and M. K. Vermaak, Investigation of froth flotation for beneficiation of printed circuit board comminution fines, Minerals Engineering, vol.22, issue.4, pp.378-385, 2009.

C. J. Oh, S. O. Lee, H. S. Yang, T. J. Ha, M. J. Kim et al., Recycling of NdFeB magnets using sulfation, selective roasting, and water leaching, Journal of the Air & Waste Management Association, vol.53, issue.7, pp.199-215, 2003.

B. Onghena, J. Jacobs, L. Van-meervelt, and K. Binnemans, Homogeneous liquidliquid extraction of neodymium (III) by choline hexafluoroacetylacetonate in the ionic liquid choline bis (trifluoromethylsulfonyl) imide, Dalton Transactions, vol.43, issue.30, pp.11566-11578, 2014.

Y. J. Park and D. J. Fray, Recovery of high purity precious metals from printed circuit boards, Journal of Hazardous Materials, vol.164, issue.2-3, pp.1152-1158, 2009.

J. Park, Y. Jung, P. Kusumah, J. Lee, K. Kwon et al., Application of ionic liquids in hydrometallurgy, International Journal of Molecular Sciences, vol.15, issue.9, pp.15320-15343, 2014.

S. Park, S. Kim, Y. Han, and J. Park, Apparatus for electronic component disassembly from printed circuit board assembly in e-wastes, International Journal of Mineral Processing, vol.144, pp.11-15, 2015.

M. Petranikova, I. Herdzik-koniecko, B. M. Steenari, and C. Ekberg, , 2017.

, Hydrometallurgical processes for recovery of valuable and critical metals from spent car NiMH batteries optimized in a pilot plant scale, Hydrometallurgy, vol.171, pp.128-141

P. M. Petter, H. M. Veit, and A. M. Bernardes, Evaluation of gold and silver leaching from printed circuit board of cellphones, Waste Management, vol.34, issue.2, pp.475-482, 2014.

L. Pietrelli, B. Bellomo, D. Fontana, and M. Montereali, Characterization and leaching of NiCd and NiMH spent batteries for the recovery of metals, Waste Management, vol.25, issue.2, pp.221-226, 2005.

D. G. Porob, A. M. Srivastava, P. K. Nammalwar, G. C. Ramachandran, and H. A. Comanzo, , vol.137, 2012.

A. Priya and S. Hait, Comprehensive characterization of printed circuit boards of various end-of-life electrical and electronic equipment for beneficiation investigation, Waste Management, vol.75, pp.103-123, 2018.

P. Quinet, J. Proost, and A. Van-lierde, Recovery of precious metals from electronic scrap by hydrometallurgical processing routes, Minerals & Metallurgical Processing, vol.22, issue.1, pp.17-22, 2005.

M. A. Rabah, Recyclables recovery of europium and yttrium metals and some salts from spent fluorescent lamps, Waste Management, vol.28, issue.2, pp.318-325, 2008.

J. P. Rabatho, W. Tongamp, Y. Takasaki, K. Haga, and A. Shibayama, Recovery of Nd and Dy from rare earth magnetic waste sludge by hydrometallurgical process, Journal of Material Cycles and Waste Management, vol.15, issue.2, pp.171-178, 2013.

S. Riaño and K. Binnemans, Extraction and separation of neodymium and dysprosium from used NdFeB magnets: an application of ionic liquids in solvent extraction towards the recycling of magnets, Green Chemistry, vol.17, issue.5, pp.2931-2942, 2015.

B. H. Robinson, E-waste: an assessment of global production and environmental impacts, Science of the Total Environment, vol.408, issue.2, pp.183-191, 2009.

A. Rout, J. Kotlarska, W. Dehaen, and K. Binnemans, Liquid-liquid extraction of neodymium (III) by dialkylphosphate ionic liquids from acidic medium: the importance of the ionic liquid cation, Physical Chemistry Chemical Physics, vol.15, issue.39, pp.16533-16541, 2013.

M. Sahin, A. Akcil, C. Erust, S. Altynbek, C. S. Gahan et al., A potential alternative for precious metal recovery from e-waste: iodine leaching, Separation Science and Technology, vol.50, issue.16, pp.2587-2595, 2015.

S. Sakultung, K. Pruksathorn, and M. Hunsom, Simultaneous recovery of valuable metals from spent mobile phone battery by an acid leaching process, Korean Journal of Chemical Engineering, vol.24, issue.2, pp.272-277, 2007.

V. Savvilotidou, J. N. Hahladakis, and E. Gidarakos, Leaching capacity of metalsmetalloids and recovery of valuable materials from waste LCDs, Waste Management, vol.45, pp.314-324, 2015.

U. Schwarz-schampera and P. M. Herzig, Indium: Geology, Mineralogy and Economics, 2002.

B. Scrosati, A. Krebs, M. Beck, and J. Bartels, An update of the portable battery market and the rechargeable battery collection in Japan, Proceedings of 12th international Congress for Battery Recycling ICBR, pp.27-34, 2007.

A. Serpe, A. Rigoldi, C. Marras, F. Artizzu, M. L. Mercuri et al., Chameleon behaviour of iodine in recovering noble-metals from WEEE: Towards sustainability and "zero" waste, Green Chemistry, vol.17, issue.4, pp.2208-2216, 2015.

M. Sethurajan, P. N. Lens, H. A. Horn, L. H. Figueiredo, and E. D. Van-hullebusch, Leaching and recovery of metals, Sustainable heavy metal remediation, vol.2, pp.161-206, 2017.
URL : https://hal.archives-ouvertes.fr/insu-02548981

L. Shen, J. Chen, L. Chen, C. Liu, D. Zhang et al., Extraction of mid-heavy rare earth metal ions from sulfuric acid media by ionic liquid, 2016.

, Hydrometallurgy, vol.161, pp.152-159

P. P. Sheng and T. H. Etsell, Recovery of gold from computer circuit board scrap using aqua-regia, Waste Management & Research, vol.25, issue.4, pp.380-383, 2007.

S. M. Shin, N. H. Kim, J. S. Sohn, D. H. Yang, and Y. H. Kim, Development of a metal recovery process from Li-ion battery wastes, Hydrometallurgy, vol.79, issue.3, pp.172-181, 2005.

M. A. Shuva and A. S. Kurny, Dissolution kinetics of cathode of spent lithium ion battery in hydrochloric acid solutions, Journal of the Institution of Engineers (India): Series D, vol.94, issue.1, pp.13-16, 2013.

A. V. Silveira, M. S. Fuchs, D. K. Pinheiro, E. H. Tanabe, and D. A. Bertuol, Recovery of indium from LCD screens of discarded cell phones, Waste Management, vol.45, pp.334-342, 2015.

G. C. Stevens and M. Goosey, Materials used in manufacturing electrical and electronic products, Environmental Science and Technology: 27 Electronic Waste Management, pp.40-73, 2008.

X. Sun, J. R. Bell, H. Luo, and S. Dai, Extraction separation of rare-earth ions via competitive ligand complexations between aqueous and ionic-liquid phases, Dalton Transactions, vol.40, issue.31, pp.8019-8023, 2011.

L. Sun and K. Qiu, Organic oxalate as leachant and precipitant for the recovery of valuable metals from spent lithium-ion batteries, Waste Management, vol.32, issue.8, pp.1575-1582, 2012.

X. Sun, H. Luo, and S. Dai, Mechanistic investigation of solvent extraction based on anion-functionalized ionic liquids for selective separation of rare-earth ions, Dalton Transactions, vol.42, issue.23, pp.8270-8275, 2013.

X. Sun and K. E. Waters, The adjustable synergistic effects between acid-base coupling bifunctional ionic liquid extractants for rare earth separation, AIChE Journal, vol.60, issue.11, pp.3859-3868, 2014.

S. Syed, Recovery of gold from secondary sources-A review, Hydrometallurgy, vol.115, pp.30-51, 2012.

Q. Tan, J. Li, and X. Zeng, Rare earth elements recovery from waste fluorescent lamps: A review, Critical Reviews in Environmental Science and Technology, vol.45, issue.7, pp.749-776, 2015.

M. Tanriverdi, H. Mordogan, and U. Ipekoglu, Leaching of Ovacik gold ore with cyanide, thiourea and thiosulfate, Minerals Engineering, vol.18, issue.3, pp.363-365, 2005.

, How does a compact fluorescent light-bulb save energy?, 2012.

A. C. Tolcin, U.S. Geological Survey Indium. Mineral Commodity Summaries, 2012.

A. Tuncuk, V. Stazi, A. Akcil, E. Y. Yazici, and H. Deveci, Aqueous metal recovery techniques from e-scrap: Hydrometallurgy in recycling. Minerals Engineering, vol.25, pp.28-37, 2012.

C. Tunsu and T. Retegan, Hydrometallurgical processes for the recovery of metals from WEEE, WEEE Recycling, pp.139-175, 2017.

R. Turgis, G. Arrachart, V. Dubois, S. Dourdain, D. Virieux et al., Performances and mechanistic investigations of a triphosphine trioxide/ionic liquid system for rare earth extraction, Dalton Transactions, vol.45, issue.3, pp.1259-1268, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01999428

M. Ueberschaar, S. J. Otto, and V. S. Rotter, Challenges for critical raw material recovery from WEEE-The case study of gallium, Waste Management, vol.60, pp.534-545, 2017.

T. Van-der-hoogerstraete, S. Wellens, K. Verachtert, and K. Binnemans, Removal of transition metals from rare earths by solvent extraction with an undiluted phosphonium ionic liquid: separations relevant to rare-earth magnet recycling, Green Chemistry, vol.15, issue.4, pp.919-927, 2013.

T. Van-der-hoogerstraete and K. Binnemans, Highly efficient separation of rare earths from nickel and cobalt by solvent extraction with the ionic liquid trihexyl (tetradecyl) phosphonium nitrate: a process relevant to the recycling of rare earths from permanent magnets and nickel metal hydride batteries, Green Chemistry, vol.16, issue.3, pp.1594-1606, 2014.

A. H. Veeken, L. Akoto, L. W. Pol, and J. Weijma, Control of the sulfide (S 2-) concentration for optimal zinc removal by sulfide precipitation in a continuously stirred tank reactor, Water Research, vol.37, issue.15, pp.3709-3717, 2003.

H. M. Veit, T. R. Diehl, A. P. Salami, J. D. Rodrigues, A. M. Bernardes et al., Utilization of magnetic and electrostatic separation in the recycling of printed circuit boards scrap, Waste Management, vol.25, issue.1, pp.67-74, 2005.

H. M. Veit, N. C. Juchneski, and J. Scherer, Use of gravity separation in metals concentration from printed circuit board scraps, Revista Escola de Minas, vol.67, pp.73-79, 2014.

N. Vieceli, C. A. Nogueira, C. Guimarães, M. F. Pereira, F. O. Durão et al., Hydrometallurgical recycling of lithium-ion batteries by reductive leaching with sodium metabisulphite, Waste Management, vol.71, pp.350-361, 2018.

A. Vidyadhar and A. Das, Enrichment implication of froth flotation kinetics in the separation and recovery of metal values from printed circuit boards. Separation and Purification Technology, vol.118, pp.305-312, 2013.

J. Vinals, E. Juan, A. Roca, M. Cruells, and J. Casado, Leaching of metallic silver with aqueous ozone, Hydrometallurgy, vol.76, issue.3-4, pp.225-232, 2005.

S. Virolainen, Hydrometallurgical recovery of valuable metals from secondary raw materials, Thesis for the degree of Doctor of Science (Technology), 2013.

B. Volesky, Biosorption and me, Water Research, issue.18, pp.4017-4029, 2007.

L. K. Wang and H. Yung-tse, Physicochemical Treatment Processes, vol.3, 2005.

X. Wen, Y. Zhao, C. Duan, X. Zhou, H. Jiao et al., Study on Metals Recovery from Discarded Printed Circuit Boards by Physical Methods, Proceedings of the 2005 IEEE International Symposium, pp.121-128, 2005.

B. A. Wills and J. Finch, Wills' mineral processing technology, p.512, 2015.

J. Willner and A. Fornalczyk, Extraction of metals from electronic waste by bacterial leaching, Environment Protection Engineering, vol.39, issue.1, pp.197-208, 2013.

Y. Wu, X. Yin, Q. Zhang, W. Wang, and X. Mu, The recycling of rare earths from waste tricolor phosphors in fluorescent lamps: A review of processes and technologies, 2014.

, Conservation and Recycling, vol.88, pp.21-31

W. D. Xing and M. S. Lee, Leaching of gold and silver from anode slime with a mixture of hydrochloric acid and oxidizing agents, Geosystem Engineering, vol.20, issue.4, pp.216-223, 2017.

F. R. Xiu, Y. Y. Qi, and F. S. Zhang, Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment, Waste Management, vol.41, pp.134-141, 2015.

Q. Xu, D. H. Chen, L. Chen, and M. H. Huang, Iodine leaching process for recovery of gold from waste PCB, Chinese Journal of Environmental Engineering, vol.3, issue.5, pp.911-914, 2009.

Q. Xu, D. H. Chen, L. Chen, and M. H. Huang, Gold leaching from waste printed circuit board by iodine process, Nonferrous Metals, vol.62, issue.3, pp.88-90, 2010.

L. H. Yamane, V. T. De-moraes, D. C. Espinosa, and J. A. Ten-orio, Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers, Waste Management, issue.12, pp.2553-2558, 2011.

H. Yang, W. Wang, H. Cui, D. Zhang, Y. Liu et al., Recovery of rare earth elements from simulated fluorescent powder using bifunctional ionic liquid extractants (Bif-ILEs), Journal of Chemical Technology and Biotechnology, vol.87, issue.2, pp.198-205, 2012.

F. Yang, F. Kubota, Y. Baba, N. Kamiya, and M. Goto, Selective extraction and recovery of rare earth metals from phosphor powders in waste fluorescent lamps using an ionic liquid system, Journal of Hazardous Materials, vol.254, pp.79-88, 2013.

J. Yang, T. Retegan, and C. Ekberg, Indium recovery from discarded LCD panel glass by solvent extraction, Hydrometallurgy, vol.137, pp.68-77, 2013.

B. Yarar, Long term persistence of cyanide species in mine waste environments. Tailings and Mine Waste, vol.2, pp.197-203, 2002.

E. Y. Yaz?c? and H. Deveci, Recovery of Metals from E-wastes, vol.48, pp.3-18, 2009.

E. Y. Yaz?c?, H. Deveci, I. Alp, A. Akcil, and R. Yaz?c?, Characterisation of Computer Printed Circuit Boards for Hazardous Properties and Beneficiation Studies, XXV. Int. Mineral Processing Congress (IMPC), pp.4009-4015, 2010.

E. Y. Yaz?c?, R. Yaz?c?, H. Deveci, and _. I. Alp, Eddy current separation of metals from e-wastes, Proceedings of the XIIth. International Mineral Processing Symposium, 6-10 Oct, pp.1207-1215, 2010.

E. Y. Yazici and H. Deveci, Extraction of metals from waste printed circuit boards (WPCBs) in H 2 SO 4 -CuSO 4 -NaCl solutions, Hydrometallurgy, vol.139, pp.30-38, 2013.

E. Y. Yazici and H. Deveci, Ferric sulfate leaching of metals from waste printed circuit boards, International Journal of Mineral Processing, vol.133, pp.39-45, 2014.

E. Y. Yazici and H. Deveci, Cupric chloride leaching (HCl-CuCl 2 -NaCl) of metals from waste printed circuit boards (WPCBs), International Journal of Mineral Processing, vol.134, pp.89-96, 2015.

E. Y. Yaz?c?, H. Deveci, R. Yazici, and A. Akcil, Base and Precious Metal Losses in Magnetic Separation of Waste Printed Circuit Boards, Proceedings of European Metallurgical Conference-EMC 2015, vol.2, pp.649-662, 2015.

H. S. Yoon, C. J. Kim, K. W. Chung, S. J. Lee, A. R. Joe et al., Leaching kinetics of neodymium in sulfuric acid from E-scrap of NdFeB permanent magnet, Korean Journal of Chemical Engineering, vol.31, issue.4, pp.706-711, 2014.

M. A. Zazycki, E. H. Tanabe, D. A. Bertuol, and G. L. Dotto, Adsorption of valuable metals from leachates of mobile phone wastes using biopolymers and activated carbon, Journal of Environmental Management, vol.188, pp.18-25, 2017.

G. Zeng, X. Deng, S. Luo, X. Luo, and J. Zou, A copper-catalyzed bioleaching process for enhancement of cobalt dissolution from spent lithium-ion batteries, Journal of Hazardous Materials, vol.199, pp.164-169, 2012.

X. Zeng, J. Li, and N. Singh, Recycling of spent lithium-ion battery: A critical review, Critical Reviews in Environmental Science and Technology, vol.44, issue.10, pp.1129-1165, 2014.

L. Zhan, F. Xia, Q. Ye, X. Xiang, and B. Xie, Novel recycle technology for recovering rare metals (Ga, In) from waste light-emitting diodes, Journal of Hazardous Materials, vol.299, pp.388-394, 2015.

X. Zhang, L. Chen, and Z. Fang, Review on gold leaching from PCB with noncyanide leach reagents, Nonferrous Metals, vol.61, pp.72-76, 2009.

S. Zhang and E. Forssberg, Mechanical separation-oriented characterization of electronic scrap. Resources, Conservation and Recycling, vol.21, pp.39-45, 1997.

S. Zhang and E. Forssberg, Mechanical recycling of electronics scrap-the current status and prospects, Waste Management & Research, vol.16, issue.2, pp.119-128, 1998.

Y. Zhang, A. Li, H. Xie, X. Zeng, and J. Li, Current status on leaching precious metals from waste printed circuit boards, The 7th International Conference on Waste Management and Technology, vol.16, pp.560-568, 2012.

Y. Zhang, S. Liu, H. Xie, X. Zeng, and J. Li, Current status on leaching precious metals from waste printed circuit boards, Procedia Environmental Sciences, vol.16, pp.560-568, 2012.

Q. Zhang and F. Saito, Non-thermal extraction of rare earth elements from fluorescent powder by means of its mechanochemical treatment, Shigen to Sozai, vol.114, issue.4, pp.253-257, 1998.

G. Zhang, H. Wang, Y. He, X. Yang, Z. Peng et al., Triboelectric separation technology for removing inorganics from non-metallic fraction of waste printed circuit boards: Influence of size fraction and process optimization, Waste Management, vol.60, pp.42-49, 2017.

K. Zhang, Y. Wu, W. Wang, B. Li, Y. Zhang et al., Recycling indium from waste LCDs: a review. Resources, Conservation and Recycling, vol.104, pp.276-290, 2015.

L. Zhang and Z. Xu, A review of current progress of recycling technologies for metals from waste electrical and electronic equipment, Journal of Cleaner Production, vol.127, pp.19-36, 2016.

Z. Y. Zhang and F. S. Zhang, Synthesis of cuprous chloride and simultaneous recovery of Ag and Pd from waste printed circuit boards, Journal of Hazardous Materials, vol.261, pp.398-404, 2013.

Y. Zhao, X. Wen, B. Li, and D. Tao, Recovery of copper from waste printed circuit boards, Minerals & Metallurgical Processing, vol.21, issue.2, pp.99-102, 2004.

Y. Zheng, H. L. Long, L. Zhou, Z. S. Wu, X. Zhou et al., Leaching procedure and kinetic studies of cobalt in cathode materials from spent lithium ion batteries using organic citric acid as leachant, International Journal of Environmental Research, vol.10, issue.1, pp.159-168, 2016.

P. Zhou, Z. Zheng, and J. Tie, Technological process for extracting gold, silver and palladium from electronic industry waste Chinese Patent, 2005.

Y. Zhu, Y. Zheng, and A. Wang, Preparation of granular hydrogel composite by the redox couple for efficient and fast adsorption of La (III) and Ce (III), Journal of Environmental Chemical Engineering, vol.3, issue.2, pp.1416-1425, 2015.