Multifrontal parallel distributed symmetric and unsymmetric solvers, Multifrontal parallel distributed symmetric and unsymmetric solvers, pp.501-520, 2000. ,
DOI : 10.1016/S0045-7825(99)00242-X
URL : https://hal.archives-ouvertes.fr/hal-00856651
Finite Element Procedures in Engineering Analysis, Journal of Pressure Vessel Technology, vol.106, issue.4, 1982. ,
DOI : 10.1115/1.3264375
Styles of crustal deformation in compressional orogens caused by subduction of the underlying lithosphere, Tectonophysics, vol.232, issue.1-4, pp.119-132, 1994. ,
DOI : 10.1016/0040-1951(94)90079-5
The continental collision zone, South Island, New Zealand: Comparison of geodynamical models and observations, Journal of Geophysical Research: Solid Earth, vol.18, issue.B2, pp.3333-3359, 1996. ,
DOI : 10.1029/95JB02401
Factors controlling the Alpine evolution of the central Pyrenees inferred from a comparison of observations and geodynamical models, Journal of Geophysical Research: Solid Earth, vol.17, issue.12, pp.8121-8145, 2000. ,
DOI : 10.1029/1999JB900390
Himalayan tectonics explained by extrusion of a low-viscosity crustal channel coupled to focused surface denudation, Nature, vol.414, issue.6865, pp.414-738, 2001. ,
DOI : 10.1038/414738a
Element-free Galerkin methods, International Journal for Numerical Methods in Engineering, vol.95, issue.2, pp.229-256, 1994. ,
DOI : 10.1002/nme.1620370205
Numerical solution of saddle point problems, Acta Numerica, vol.14, pp.1-137, 2005. ,
DOI : 10.1017/S0962492904000212
Stabilization of Low-order Mixed Finite Elements for the Stokes Equations, SIAM Journal on Numerical Analysis, vol.44, issue.1, pp.82-101, 2006. ,
DOI : 10.1137/S0036142905444482
Vertical bearing capacity factors for circular and strip footings on Mohr???Coulomb soil, Canadian Geotechnical Journal, vol.30, issue.6, pp.1024-1033, 1993. ,
DOI : 10.1139/t93-099
Limits on lithospheric stress imposed by laboratory experiments, Journal of Geophysical Research: Solid Earth, vol.59, issue.6, pp.6248-6252, 1980. ,
DOI : 10.1029/JB085iB11p06248
Three-dimensional numerical modeling of compressional orogenies: Thrust geometry and oblique convergence, Geology, vol.21, issue.2, pp.153-156, 1993. ,
DOI : 10.1130/0091-7613(1993)021<0153:TDNMOC>2.3.CO;2
A numerical method for solving partial differential equations on highly irregular evolving grids, Nature, vol.376, issue.6542, pp.655-660, 2002. ,
DOI : 10.1038/376655a0
A simple parameterization of strain localization in the ductile regime due to grain size reduction: A case study for olivine, Journal of Geophysical Research: Solid Earth, vol.383, issue.B11, pp.167-25181, 1999. ,
DOI : 10.1029/1999JB900214
DOUAR: A new three-dimensional creeping flow numerical model for the solution of geological problems, Physics of the Earth and Planetary Interiors, vol.171, issue.1-4, pp.76-91, 2008. ,
DOI : 10.1016/j.pepi.2008.05.003
URL : https://hal.archives-ouvertes.fr/hal-00532147
High-temperature flow of rocks, Reviews of Geophysics, vol.54, issue.141, pp.344-349, 1975. ,
DOI : 10.1029/RG013i003p00344
Lower bound shakedown analysis by using the element free Galerkin method and non-linear programming, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.45-48, pp.3911-3921, 2008. ,
DOI : 10.1016/j.cma.2008.03.009
Computation of collapse states with von Mises type yield condition, International Journal for Numerical Methods in Engineering, vol.12, issue.8, pp.1185-1202, 1999. ,
DOI : 10.1002/(SICI)1097-0207(19991120)46:8<1185::AID-NME743>3.0.CO;2-N
Automatic mesh refinement in limit analysis, International Journal for Numerical Methods in Engineering, vol.36, issue.6, pp.1331-1346, 2001. ,
DOI : 10.1002/1097-0207(20010228)50:6<1331::AID-NME46>3.0.CO;2-S
Essai sur une application des règles de maximis et minimis a ` quelques problèmes de statique relatifs a ` l'architecture, Mem, Acad. R. Pres. Divers Savants, vol.7, pp.343-382, 1773. ,
Soil mechanics and plastic analysis or limit design, Quarterly of Applied Mathematics, vol.10, issue.2, pp.157-165, 1952. ,
DOI : 10.1090/qam/48291
Bearing Capacity of Circular Footings, Journal of Geotechnical and Geoenvironmental Engineering, vol.128, issue.1, pp.38-43, 2002. ,
DOI : 10.1061/(ASCE)1090-0241(2002)128:1(38)
The mathematical theory of the inelastic continuum, Encyclopedia of Physics, pp.229-433, 1958. ,
An arbitrary Lagrangian-Eulerian formulation for creeping flows and its application in tectonic models, Geophysical Journal International, vol.120, issue.1, pp.1-23, 1995. ,
DOI : 10.1111/j.1365-246X.1995.tb05908.x
Undrained Bearing Capacity of Square and Rectangular Footings, International Journal of Geomechanics, vol.6, issue.3, pp.147-157, 2006. ,
DOI : 10.1061/(ASCE)1532-3641(2006)6:3(147)
Lithosphere tearing at STEP faults: response to edges of subduction zones, Earth and Planetary Science Letters, vol.236, issue.1-2, pp.505-523, 2005. ,
DOI : 10.1016/j.epsl.2005.03.022
Wsmp: Watson sparse matrix package (part-ii: direct solution of general sparse systems, Tech. Rep. RC 21888 (98472), IBM T.J. Watson Res. Cent, 2000. ,
The Mathematical Theory of Plasticity, 1950. ,
Crustal thickening versus lateral expulsion in the Indian-Asian continental collision, Journal of Geophysical Research: Solid Earth, vol.93, issue.B7, pp.333-12249, 1993. ,
DOI : 10.1029/93JB00443
The Finite Element Method. Linear Static and Dynamic Finite Element Analysis, 2000. ,
A general algorithm for plastic flow simulation by finite element limit analysis, International Journal of Solids and Structures, vol.36, issue.8, pp.1193-1207, 1999. ,
DOI : 10.1016/S0020-7683(97)00347-8
Fundamentals of the Theory of Plasticity, 2004. ,
Bearing capacity of circular footings under surcharge using state-dependent finite element analysis, Computers and Geotechnics, vol.32, issue.6, pp.445-457, 2005. ,
DOI : 10.1016/j.compgeo.2005.07.005
Upper bound limit analysis using linear finite elements and non-linear programming, International Journal for Numerical and Analytical Methods in Geomechanics, vol.32, issue.2, pp.181-216, 2002. ,
DOI : 10.1002/nag.198
Mantle convection with a brittle lithosphere: thoughts on the global tectonic styles of the Earth and Venus, Geophysical Journal International, vol.133, issue.3, pp.669-682, 1998. ,
DOI : 10.1046/j.1365-246X.1998.00521.x
Shakedown analysis using the -adaptive finite element method and linear programming, Engineering Structures, vol.29, issue.1, pp.46-56, 2007. ,
DOI : 10.1016/j.engstruct.2006.03.033
Finite Elements in Plasticity, 1980. ,
Experimental Rock Deformation: The Brittle Field, 1978. ,
DOI : 10.1007/978-3-662-11720-0
Shear localization and shear instability in materials in the ductile field, Journal of Structural Geology, vol.2, issue.1-2, pp.135-142, 1980. ,
DOI : 10.1016/0191-8141(80)90043-7
The effect of energy feedbacks on continental strength, Nature, vol.45, issue.7098, pp.67-70, 2006. ,
DOI : 10.1038/nature04868
Bearing capacity of strip and circular foundations on undrained clay subjected to eccentric loads, G??otechnique, vol.52, issue.1, pp.61-64, 2002. ,
DOI : 10.1680/geot.2002.52.1.61
Heinrich Hencky: a rheological pioneer, Rheologica Acta, vol.42, issue.1-2, pp.93-101, 2003. ,
DOI : 10.1007/s00397-002-0259-6
Performance of the p-version finite element method for limit analysis, International Journal of Mechanical Sciences, vol.45, issue.6-7, pp.1149-1166, 2003. ,
DOI : 10.1016/j.ijmecsci.2003.08.004
Sur l'e ´coulement des corps solides soumis a ` de fortes pressions, C. R. Acad. Sci, vol.59, p.754, 1864. ,
Mechanik der festen korper im plastisch deformablen zustand, Nachr. K. Ges. Wiss, vol.1, pp.582-592, 1913. ,
Dynamic and kinematic growth and change of a Coulomb wedge, Thrust Tectonics, pp.19-31, 1992. ,
DOI : 10.1007/978-94-011-3066-0_2
Mechanical model for the tectonics of doubly vergent compressional orogens, Mechanical model for the tectonics of doubly vergent compressional orogens, pp.371-374, 1993. ,
DOI : 10.1130/0091-7613(1993)021<0371:MMFTTO>2.3.CO;2
A simple mixed finite element for static limit analysis, Computers & Structures, vol.84, issue.29-30, pp.1906-1917, 2006. ,
DOI : 10.1016/j.compstruc.2006.08.019
The Finite Element Method, Solid Mechanics, 2002. ,
Softening, localisation and adaptive remeshing. Capture of discontinuous solutions, Computational Mechanics, vol.12, issue.1-2, pp.98-106, 1995. ,
DOI : 10.1007/BF00356482
Université de Rennes 1, Rennes CEDEX F-CS35042, France. (jean.braun@univ-rennes1.fr) P. Fullsack, Oceanography Department, p.12207 ,