Investigation of CFRP machining with diamond abrasive cutters - Ecole Centrale de Nantes Accéder directement au contenu
Article Dans Une Revue Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials Année : 2013

Investigation of CFRP machining with diamond abrasive cutters

Résumé

Diamond abrasive cutters are more and more used for industrial applications of CFRP laminate machining, due to their resistance to abrasion and low cost. The objective of the approach is to improve productivity during trimming operations, by choosing adapted tools and cutting parameters. The objective of this article is to determine to what extent feedrate and spindle speed can be increased. To do so, specific cutting energy (Esp) and cutting forces are studied. Designs of Experiments and ANOVA are performed in order to analyze the influence of tool (grit size, level of nickel and diameter) and process (feed per revolution and cutting speed) parameters. It shows that high cutting speed is favourable to the cut due to thermal effects. Conversely, the study of specific cutting energy reveals that the feed increase is limited by diamond grit size and level of nickel due to the saturation of the tool intergrit space.
Fichier principal
Vignette du fichier
LAMPA_RCMA_2013_BOUDELIER.pdf (331.04 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02281533 , version 1 (09-09-2019)

Identifiants

  • HAL Id : hal-02281533 , version 1

Citer

Aude Boudelier, Mathieu Ritou, Sébastien Garnier, Benoit Furet. Investigation of CFRP machining with diamond abrasive cutters. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2013, 23 (3), pp.425-436. ⟨hal-02281533⟩
25 Consultations
41 Téléchargements

Partager

Gmail Facebook X LinkedIn More